2 bedroom apartment 80 m² Limassol District, Cyprus

FOUNDATION AND FRAME: Static and anti-seismic study according to the specifications of the Cyprus code. Reinforced concrete structure for durability and stability. MASONRY AND FINISHES: High-quality perforated bricks (10 cm thickness for inner walls, 25 cm for outer walls). Facade system with thermal insulation for energy efficiency. Interior surfaces plastered and painted with three coats of premium-quality paint. ROOF: 5 cm polystyrene insulation. Screed layer and 4 mm bituminous waterproofing membrane for enhanced protection. TILES: Bathroom walls, shower, and toilet covered with ceramic tiles (value: €40/sq.m) up to a height of 2.40m. Kitchen wall (between counter and cabinets) tiled with ceramic tiles (€40/sq.m). Kitchen countertop made of granite (€120/m). FLOORS: Communal stairs, living rooms, kitchens, corridors, bathrooms, and toilets covered with high-quality Spanish/Italian ceramic tiles (€50/sq.m). Terrace flooring with ceramic tiles (€30/sq.m). Waterproof laminated parquet in bedrooms (€30/sq.m, including installation). Stairs, lift corridors, and lobby finished with marble or ceramic tiles (€30/m). CARPENTRY: Kitchen cabinets, room wardrobes, interior doors, and sink cabinets crafted from high-quality Italian laminate (€100/m). FACADE: Windows and sliding doors with high thermal efficiency monochromatic aluminum frames. Balconies fitted with safety glass for enhanced security and aesthetics. SANITARY WARE: High-quality sanitary ware worth €2500. Premium accessories for a modern finish. PLUMBING: Solar water heater with 2 frames. Pressure boiler and 1000L water tank. Pressure system installed in each apartment. WATER FILTER DISPENSER: Central water pipe fitted with a high-performance water filter dispenser. PHOTOVOLTAIC SYSTEM: Energy-efficient photovoltaic system (A-rated) for communal areas. ELECTRICAL INSTALLATION: High-quality materials in compliance with EAC regulations. PROVISIONS: Security system and surveillance camera provisions for communal areas. CLARIFICATIONS: If buyers exceed the specified material cost, they must cover the additional amount. Any requested material changes must be approved by the manufacturer, with cost differences calculated and communicated to the buyer.